Products
Cattie Adhesives is a leading US Manufacturer and Value-added Supplier of Hot Melts, Water-Based Adhesives, Cohesive and Dextrin.
Our Products:
- Water-based Resins, Dextrins, PSAs and Acrylics.
- Hot-melt EVAs, PEs, Metallocene, PSAs and PURs.
- Protein Adhesives, Reactive Products.
- Custom Adhesives for Specific Customer Needs.
To speak with a technical representative about your application, and to request samples, please call us at 1-800-249-0337 or email us at sales@cattieadhesives.com
Cohesive
Cohesive, also called “Cold Seal Adhesive” is designed to stick only to itself; the Cohesive is applied to each surface to be bonded together and then Dried.
The final bond is not created until the two Dried surfaces make contact again.
Custom Formulated Adhesives
Custom Formulated Adhesive Solutions ? We Listen to Understand Your Specific Needs, and Design & Deliver Custom Formulated Adhesive Solutions that optimize both product cost and performance.
Our Goal – To provide the Best Adhesive Solutions that Save your company Time and $$.
Click for Detailed Product Information
Dextrin
Dextrin, also called “Brown Glue”, is used on a variety of mostly porous surfaces.
Dextrin or Resin/Dextrin Blends are a great choice for many Laminating, Paper Converting & Product Assembly applications and offer a Lower cost alternative with better Clean-Up properties than most Full-Resins.
Heat Seal Coatings
Heat Seal Coatings are 1st applied to a paper/film/foil substrates and Dried. The final bond is not formed until the Heat Seal Coating is Re-activated.
Cattie Adhesives manufactures a Full Line of Heat Seal Coatings for many industrial Food Packaging, Flexible Packaging, Paper Converting and Specialty Applications.
Hot Melt adhesives
Cattie Adhesives manufactures a Full Line of Hot Melt Adhesives for most industrial applications. Our Bulk Hot Melt adhesives are used for many automated, higher volume adhesive bonding processes.
We also have the capability to Coat our Hot Melt Adhesives onto many different substrates including felts, films, magnet, papers, plastics, and textiles…
Hot Melt Glue Sticks
Hot Melt Glue Stick adhesives are a good choice for most low volume adhesive bonding and hand held assembly gluing needs.
Our Industrial grade Hot Melt Glue Sticks are formulated with the same high quality raw materials as our Bulk hot melts that we produce in chip, pellet and pillow forms.
Hot Melt – Low Temperature
Low Temperature (LT) hot melt adhesives are a new-generation of Packaging adhesives designed for Case, Tray and Carton Sealing. LT hot melt adhesives have excellent pot life stability, clear color, offer high heat resistance and are not prone to charring or odor.
Hot Melt-APAO
APAO (Amorphous Poly-Alpha-Olefins) hot melt adhesives are designed to be a lower cost adhesive option for most Product Assembly applications.
APAO hot melts are used when High Heat Resistance is required or good acid, chemical and fuel resistance is needed.
Hot Melt-EVA
EVA (Ethylene – Vinyl Acetate) hot melt adhesives are an economical bonding option for a variety of Packaging and Assembly applications.
EVA hot melts can be formulated to be very Fast Setting or have Long Open Times and can be designed for High Heat and Freezer Grade applications.
Hot Melt-Fugitive
Fugitive / Removable hot melt adhesive, also called Credit Card glue or Booger glue, is a low-tack adhesive that produces a removable, non-permanent bonds.
Fugitive hot melt adhesives form a Temporary Bond between two substrates and can be separated without damaging either substrate.
Hot Melt-Metallocene
Metallocene Based hot melt adhesives are a new-generation of Packaging adhesives designed for Case, Tray and Carton Sealing.
Metallocene based hot melt adhesives have excellent pot life stability, clear color, offer high heat resistance and are not prone to charring or odor.
Hot Melt-Polyamide
Polyamide Hot Melt Adhesives are best known for their Excellent chemical, grease and oil resistance, Aggressive Bond Strength and High Heat Resistance; making them an excellent choice for many difficult to bond, low energy substrates.
Hot Melt-Polyethylene
Polyethylene Based hot melt adhesives are Packaging adhesives designed for bonding well to porous substrates, they are best for use in moderate temperature ranges and where minimum flexibility is required.
Hot Melt-Pressure Sensitive
Hot Melt Pressure Sensitive Adhesives (HMPSA) are best known for their Aggressive Bond Strength, Low Temperature Flexibility and High Heat Resistance; making them an excellent choice for many difficult to bond, low energy substrates.
Hot Melt-PUR
PUR (Polyurethane Reactive) hot melt adhesives are reactive moisture curing adhesives known for Strong Bonds and Exceptional Heat, Cold and Moisture-Resistance; this makes them an excellent choice for most difficult to bond, low energy substrates and they perform very well in extreme weather environments.
Pressure Sensitive Adhesives
Pressure Sensitive Adhesives (PSA’s) are unique because they do not solidify to form a hard material; they remain permanently tacky and have the ability to wet-out substrates on contact.
The bonds are formed by bringing the PSA adhesive in contact with the substrate and applying pressure to form a bond.
Water Based Adhesives
Our Water-Based Adhesives,Cohesives and Dextrins can be Custom Formulated to meet specific application requirements for Viscosity, Color, Tak, Set Speed, Bond Strength, Lay-Flat properties and other performance standards such as Heat or Cold Resistance, Water resistance, UV resistance and Plastisizer migration resistance
