Cattie Adhesive Solutions is a Manufacturer and Value-added Supplier of Bulk Hot Melt Adhesives. Our hot melt adhesives are used extensively across many industries and for many adhesive applications.
-Bulk Hot Melts are packaged in Drums & 25/35/50lb boxes-1350lbs /pallet. -Available forms include: pellets, chips, pillows, beads in bag & chub form.
Our Hot Melts can be Custom Formulated to meet specific application requirements for Color, Bond strength, Heat resistance, or other performance standards. Our Hot Melts provide Aggressive Bonds to most substrates and can be Specially Formulated to be: Clear, Light or White in Color, Clean Machining with no Odor or Stringing.
For Information or to Request Samples, Please call one of our Adhesive Specialists at:
Are you in a hurry? We maintain a large inventory of Hot Melts and Water-Based Adhesives. In most cases, we can process and ship your order within 24-48 hours. We accept credit card payments for RUSH orders.
Browse below to learn more about the Products, Markets and Applications we serve:
PERMANENT HOT MELT ADHESIVES - LOW TEMPERATURE HOT MELT ADHESIVES
Cattie Adhesive Solutions offers a complete line of "Full" and "Low" Temperature Permanent Hot Melt adhesives, based on EVA, polyolefin, polyethylene and polypropylene polymers. Our Hot Melt adhesives provide excellent adhesive bonds to low energy substrates, good flexibility, heat stability and high durability.
Cattie Adhesive Solutions offers a series of high performance Pressure Sensitive Hot Melt Adhesives (PSA's) based on block copolymers. Our PSA's are available in several degrees of peel strength, tack & shear strength and viscosity so that we can offer the right product for your application. Our PSA's offer aggressive tack and high temperature resistance, allowing them to be used in the most extreme conditions.
Cattie Adhesive Solutions offers a series of high performance Fugitive / Removable Hot Melt Adhesives. Our Fugitive Hot Melts are available in several degrees of peel strength, tack, shear strength and viscosity so that we can offer the right product for your application. Our Fugitive Hot Melts are available in "Water White" color;offer Very Low Staining properties and high temperature resistance, making them an excellent choice for affixing Credit Cards and Direct Mail applications.
Cattie Adhesive Solutions offers a line of polyamide adhesives. These Hot Melt Adhesives are used for their good balance of tensile strength and elongation. They are known to have outstanding adhesion to a wide variety of substrates, including metal, wood, plasticizedPVC and corona treated olefin films. Our Polyamide Hot Melts are exceptional for oil and grease resistance, low viscosity and fast set up times.
Industry Applications include:
Cabinets
Filters
Furniture
Product Assembly
Roofing
Shoes
Textiles
WATER-BASED DISPERSION ADHESIVES
Cattie Adhesive Solutions is a Manufacturer and Value-added Supplier of Water-based Dispersion Adhesives. Our water-based adhesives are used extensively across many industries and for many bonding applications.
Our Water-Based Adhesives are formulated to be Environmentally Friendly and meet specific application requirements for Color, Tak, Set Speed, Bond Strength, Lay-Flat properties, Heat Resistance and other performance standards. Our water-based adhesives are excellent for Packaging, Folding Carton applications and the assembly of large laminates consisting of water permeable substrates including Films, Foils, Papers & Wood materials.
Our Water-based Adhesive Technologies include:
PVA/EVA Resin Adhesives
Dextrin / Starch Based Glues
Natural & Synthetic Latex Based Dispersions
Lay-Flat Laminating Adhesives
Pressure Sensitive Adhesives
Our Water-Based Adhesives are packaged in: 5 gallon pails, 30 gallon drums, 55 gallon drums, 250 gallon tote-bins and tank wagons.
Water-based Dispersion Adhesives provide flexible bonds and excellent adhesion to:
Coated Papers/Board
Folding Cartons
Plastics
Metals
Rubbers
Leathers
Woods
Water-based Adhesives can be applied by Brush, Roller, Wheel, Cold-Glue Extrusion Systems or by Spraying. Our Adhesives are specially formulated to be Environmentally Friendly & offer E-Z Clean Up properties.
STRUCTURAL ADHESIVES
Cattie Adhesive Solutions is a Value-Added Supplier of Structural Adhesives. We are proud to offer Structural Adhesives From Lord Adhesives.
Our Structural Adhesive Technologies include:
Acrylic
Epoxy
Urethane
Cyanoacrylate
Structural Adhesives provide Agressive, Durable Bonds to a wide variety of substrates including:
Plastics
Metals
Composite Materials
Stone/Concrete
Rubbers
Woods
Fiberglass
Foams
Lord Structural Adhesives are used extensively across many industries and for many adhesive applications. To see more, visit them at www.lord.com
The adhesives are packaged in easy-to-use LORD PAK 50 mL, 200 mL and 375 mL two-component cartridges. For high-volume metal glue applications, LORD offers pails and drums suitable for meter, mix and dispense (MMD) equipment.
ADHESIVE DISPENSING EQUIPMENT
Cattie Adhesive Solutions is a Value-Added Supplier of New and Re-ConditionedHot Melt Dispensing Equipment and Replacement parts.
We are proud to offer New Bulk Hot Melt Dispensing Solutions from our OEM Partner, Hot Melt Technologies.
The Benchmark Systems bring high performance to low and medium volume Bulk hot melt operations.
With four models, there's one that matches your application.
Benchmark 205-LV2 Features an 8 lb melt tank and and adjustable flow rate up to 33 lbs/hour. The 205-LV2 is ideal for use in low volume applications using low viscosity adhesives for packaging and general product assembly.
Benchmark 215-HV features a 15 lb melt tank and an adjustable flow rate up to 65 lbs/hour. The 215-HV is for use in medium volume, heavy-duty applications. Excellent for wood- working and high volume packaging.
Benchmark 315-HP features a 15 lb melt tank, an adjustable flow rate up to 85 lbs/hour plus a microprocessor system control. The 315-HP is an excellent choice for use in production intense spray or bead applications with handguns or automatic guns.
Benchmark 500-HP features a 25 lb or 35 lb melt tank, an adjustable flow rate up to 85 lbs/hour plus a microprocessor system control. The 500-HP is your solution for dual hose production intense spray or bead applications with handguns or automatic guns.
We Offer Hot Melt Unit Replacement parts, at up to 50% Less than OEM Replacement part Prices :
Spare parts for Nordson, Meltex, Slautterback, ITW Dynatec, Graco Pyles, Spraymation, Mactron, Robatech and Dittberner Equipment. We offer Quick delivery of high quality replacement parts at low prices.
Nozzles, Hoses
Filters
Guns
Modules
Nozzle Cleaning Kits
Hot Melt System Cleaners
For Information and Pricing on Adhesive dispensing equipment or Replacement parts; Please call one of our Adhesive Specialists at:
HOT MELTS & WATER-BASED ADHESIVES
WATER-BASED DISPERSION ADHESIVES
STRUCTURAL ADHESIVES
ADHESIVE DISPENSING EQUIPMENT
