Cattie Adhesive Solutions

Providing Adhesive Solutions That Stick

Woodworking Adhesives

Woodworking Adhesives

Cattie Adhesives – has a full line of water-basedhot melts and polyurethane adhesives that can be customized to meet your various Woodworking applications.

Our water based adhesives, hot melts and polyurethane hot melts will increase your manufacturing speed, reduce your manufacturing costs and increase the strength and performance of your finished products.


Are you Tired of CLAMPING your Wood Cabinets, Doors, Drawers, Faces and Frames?

Try our 100% Solids – Polyolefin Hot Melts  or  PUR Hot Melts  to bond wood in 15 -30 seconds without clamping or clean up .

We manufacturer woodworking adhesive products that are used for applications including: furniture adhesives, cabinet & drawer assembly, counter-top adhesives, flooring adhesives, panel affixing, v-grooving, window adhesives and door adhesives.

 Call Us Today, our team will work with you to determine the best type of adhesive for your applications.

Furniture Adhesives

Image result for wooden desk

Our Applications:

  • 3D Laminating
  • Membrane Pressing
  • Finger Jointing
  • Multi-layer Laminating
  • ProfileWrapping
  • Edge Gluing
  • Face Gluing
  • Block Board Jointing
  • Chair Production
  • Dowelling
  • Edgebanding
  • Flat Lamination- Cold and Hot Press.
  • Wood Veneer
  • Seating
  • Foam Fabrication
  • Mattress- Foam Frame Assembly, Pillow Top attachment.

Call Us Today – We work with you to understand your needs and recommend the best adhesive solutions.


 Cabinet Assembly and Counter top Adhesives

Image result for modern kitchen designs with granite

Our Applications:

  • 3D Laminating
  • Membrane Pressing
  • Finger Jointing
  • Multi-layer Laminating
  • ProfileWrapping
  • Edge Gluing
  • Face Gluing
  • General Assembly
  • Drawer bottom stiffener
  • Corner spacer block gluing

We offer high performance  Polyolefin hot meltsPolyamide hot melts,  PUR Hot Melts, and  Polyurethane adhesives.


Flooring Adhesives

Image result for wood floor manufacturing

Our Applications:

  • Block Board Jointing
  • Flat Lamination- Cold and Hot Press.
  • Profile Wrapping
  • Wood Veneer
  • Finger Jointing
  • Multi-layer Laminating
  • Face Gluing
  • Edge Gluing
  • Floor Installation Adhesives
  • UV Coating – for finishing your wood floor.

We offer a line of Polyolefin Hot Meltshot melt polyurethane adhesives, pressure-sensitive adhesives and  Type I & Type II water-based wood adhesives used for producing engineered wood floors, functional under-lament and other high performance wood flooring products.


Window Adhesives

Our Applications:

  • Finger Jointing
  • Block Board Jointing

Door Manufacture Adhesives

Our Applications:

  • Finger Jointing
  • Multi-layer Laminating
  • ProfileWrapping
  • Edge Gluing
  • Face Gluing
  • General Assembly
  • Coatings/Primers

Our products are designed for varying production speeds and superior bonding of  All types of residential and commercial door constructions includingFlush, Wood, Molded, Custom Carved, Fire Rated and Exterior Wood, Steel and Fiberglass garage doors.

The Highest level of moisture and heat resistance can be reached by using our PUR – polyurethane reative hot melts.  Finish the edges of door panels with our edgebanding hot melts –  Straight edges, soft formed, or folded edge. Cattie Adhesives offers a complete line of hot melt adhesives based on EVA, APAO, and PUR, to meet the demands of highly efficient door production.

We offer  PVA’s,  Hot Melts,  Hot Melt Polyurethane adhesives and 100% solid Liquid Moisture Cure Polyurethanes.


PVA- Wood Adhesives

PVA glues (Polyvinyl-acetate) are classified into 3 categories based on Water Resistance:

Type-I (waterproof)  &  Type-II (water resistant) PVA glues, contain water, but also strands of polymers that become entangled and chemically bonded to perform better in exterior conditions. These adhesives demand the same clamp time as type-III PVA glue, but generally have a longer open time and bond at colder temperatures.

Type-III (no water resistance) PVA glue contains up to 50% water and cures as the water evaporates. Glued surfaces must be clamped together until they reach 15% to 20% of their bond strength, generally in about an hour. It can take up to 24 hours, to reach full bond strength.

Water resistance aside, there’s little difference in the strength of the joint made with any type of PVA glue.

They all can resist forces around 3500 psi to 4000 psi. PVA glue can be cleaned up with water. Once it’s dry, you can scrape or sand away excess glue.

Type I and II PVA glue –  used for exterior trim, outdoor furniture.

Type III PVA glue –  used for cabinetry, interior woodwork and trim.


Polyurethane Adhesives

Polyurethane AdhesivesOutperformPVA glues in most applications, including:  bonding stone, concrete, ceramics and foams.

100% solid Liquid Moisture Cure Polyurethanes are Not water-based, so they are not drawn into woods as drastically as PVA glues.  Wood joints glued with polyurethane will generally accept stain and clear finish better than with other types of glue. Because polyurethane glues cure by a chemical reaction triggered by moisture, they work well on woods with high moisture content or on oily woods.

Polyurethane glues – Do Not have high initial tack and generally take 8 hours to reach full strength and require clamping for proper bonds. The clamps usually can be removed after 4 hours.

The cured strength of polyurethane glue is similar to PVA— approximately 3000 psi—strong enough for most assembly applications.

Prior to drying, polyurethane glue can be removed using solvents such as mineral spirits or acetone. Once the glue has cured, you can scrape or sand away squeeze-out.

Polyurethane Adhesives –  used for Oily wood, finished wood pieces, non-woods.


 

Wood Working Adhesives for:

Woodworking | Profile Wrapping
Woodworking | Panel Wrapping
Woodworking | Hot Coating
Woodworking | High Gloss Applications
Woodworking | Fleece Backed Veneer
Woodworking | Flat Lamination
Woodworking | Board to Board Lamination – Lath Gluing

Specialized Product Assembly | Spiral Beading Assembly
Specialized Product Assembly | RV and Manufactured Housing
Specialized Product Assembly | Roofing Products
Specialized Product Assembly | Pur for Filter Industry
Specialized Product Assembly | Polyamide for Filter Industry
Specialized Product Assembly | Pipe Wrapping
Specialized Product Assembly | Insulation Coating/Bonding
Specialized Product Assembly | Insulated Glass
Specialized Product Assembly | Flooring
Specialized Product Assembly | Door Manufacturing
Specialized Product Assembly | Air Filter Pleating
Specialized Product Assembly | Adhesive-Backed Foam and Insulation

Coating | Wide Web Coating
Coating | Tape Coating
Coating | Narrow Width Web Coating
Coating | Master Roll Transparent Label Coating
Coating | Laminating with Hot Melt
Coating | Laminating
Coating | In-Line Printing
Coating | Hot Sealing Paper Treatments
Coating | Coating Packing List Envelopes
Coating | Coating of Insulated Materials


Click below for more information on our most common Woodworking Adhesives:


For more detailed information on our complete line of products, to speak with a technical representative about your application, and to request samples, please call us at 1-800-249-0337 or email us at sales@cattieadhesives.com


 

275gal_tote fiber_drum 55gal_steel_drum 5gal_pail Hot-Melt-Adhesive-mini chips

Ok No, Thanks